Versatile battery charger with the ability to charge conventional Li-ion, large capacity BPM100 and Ni-MH batteries (suitable for use with BP-M50, BP-M100 and BP-IL75).

Multi-use Battery Charger
The new BC-M150 can charge the following batteries:

BP-L60 / 90 series Li-ion batteries
Ni-MH BP-M100 series
The new BP-IL75 info lithium battery

Quick Charge Capability
The BCM-150 can significantly shorten the charge time compared to its predecssor BC-L120CE

DC Out Connector
The BC-M150 has an XLR 4pin connector which allows it to be used as an AC adaptor to supply power (16.8V, max 6A) to other portable equipment (not at the same time as battery charging)

LCD Monitor
By selecting Display you can check the remaining capacity by per cent, the remaining charge time in minutes, or the number of charge/discharge cycles (BP-IL75 only)

3 LEDs Indication of Charge Level
Three stages of charge indication level are indiciated by the LED indicators.

Refresh Function (Ni-Mh only)
If a battery pack with remaining capacity is charged repeatedly, the storage capacity of the battery may be reduced due to memory effect. To prevent against this memory effect, a “refresh function” is provided to fully discharge a battery pack before charging. This is for Ni-MH battery only.

Refreshing time:

BP-M100 with 50% remaining capacity takes approx. 2.5 hrs.
BP-M50 with 50% remaining capacity takes approx. 1.3 hrs.

Power Requriements
100 to 240V, 50/60Hz (except for USA & Canada)

Output
16.8V DC, 6.0A (for charging the Li-ion & Info Li-ion battery pack)
19.5V DC, 5.0A (for charging the Ni-MH battery pack)

Power consumption
Approx. 160W

Operating Temperature
0°C to +40°C (32°F to 104°F)

Storage temperature
-20°C to +60°C (-4°F to +140°F)

Operating/storage humidity
5% to 90% RH

Dimensions (w/h/d)
120 x 155 x 330mm (4 6/8 x 6 1/8 x 13 inches)

Mass (Approx.)
3.5kg (7 lb 11 oz)

Charge system
Constant voltage and current charge system with timer stop system

Charge control system
Constant voltage and current charge control system

Input/output connector
DC output XLR-4pin x 1
RS-232C x 1

Supplied accessories
Operating Manual x 1
Plug holder x 1

Optional accessories
DC connection cable
CCDD-X2 (2m)